Pulsed low-dose rate radiotherapy for recurrent bone sarcomas: case reports and brief review.

PURPOSE: Re-irradiation for bulky recurrent sarcoma carries significant risks. Pulsed low-dose rate radiotherapy (PLDR) is an attractive option for re-irradiation due to inherent radiobiological advantages. MATERIALS AND METHODS: We present two patients who underwent reirradiation using PLDR technique, followed by a literature review. RESULTS: The first case is that of a 76-year-old male who developed an in-field recurrence of a bulky pelvic bone high-grade chondrosarcoma after he was treated with definitive radiotherapy using helical TomoTherapy with a total dose of 66 Gy. The patient was re-irradiated using PLDR with a shrinking field technique; 50 Gy in 2 Gy fractions followed by a boost of 20 Gy in 2 Gy fractions. The patient remains disease-free without significant toxicity 60 months post-irradiation. The second case is that of an 82-year-old female who was treated with a definitive irradiation of 66 Gy in 33 fractions for a right shoulder grade II chondrosarcoma. She developed an in-field recurrence 28 months later and presented with bulky disease causing brachial plexopathy and lymphedema. The patient was re-irradiated with a palliative intent to a total dose of 50 Gy in 2 Gy fractions over 5 weeks using PLDR. Brachial plexopathy resolved shortly after re-irradiation, but local progression near the surface was evident 8 months later. She passed away from unrelated causes 11 months later. CONCLUSION: We present two cases highlighting our early experience with PLDR, which was effective in the reirradiation of recurrent bony sarcoma. Our study highlights PLDR as an option for reirradiation in recurrent unresectable tumors.

Novel and unusual USP6 fusion partners in aneurysmal bone cyst and their role in pathogenesis and histopathological evaluation of this disease.

AIMS: The purpose of this study is to report novel and unusual USP6 fusion partners in aneurysmal bone cysts (ABCs). These findings may be useful in routine diagnostics as well as in studying the biology of USP6-related disorders. METHODS: A cohort of seven patients diagnosed with ABC examined between 2014 and 2023 at Motol University Hospital in Prague was included into this retrospective non-randomised study. All cases were analysed using histopathological evaluation, immunohistochemistry and Anchored multiplex RNA methods. Demographic characteristics and clinical data were also analysed. RESULTS: We identified two novel (ZFX and IP6K2), three unusual (MEF2A, EIF1 and COL1A2) and two common (CDH11) fusion partners with USP6 gene among all seven cases of ABC. CONCLUSIONS: Cases in our study were diagnosed as ABCs due to characteristic clinical and morphological presentation. However, not all cases are as self-evident, and molecular testing is necessary. The identification of these gene alterations can be useful in distinction between true ABC and ABC-like changes among many benign and malignant bone tumours.

[Ubiquitin-specific protease 42 regulates osteogenic differentiation of human adipose-derived stem cells].

OBJECTIVE: To explore the effect of ubiquitin-specific protease 42 (USP42) on osteogenic differentiation of human adipose-derived stem cells (hASCs) in vivo and in vitro. METHODS: A combination of experiments was carried out with genetic depletion of USP42 using a lentiviral strategy. Alkaline phosphatase (ALP) staining and quantification, alizarin red S (ARS) staining and quantification were used to determine the osteogenic differentiation ability of hASCs under osteogenic induction between the experimental group (knockdown group and overexpression group) and the control group. Quantitative reverse transcription PCR (qRT-PCR) was used to detect the expression levels of osteogenesis related genes in the experimental group and control group, and Western blotting was used to detect the expression levels of osteogenesis related proteins in the experimental group and control group. Nude mice ectopic implantation experiment was used to evaluate the effect of USP42 on the osteogenic differentiation of hASCs in vivo. RESULTS: The mRNA and protein expressions of USP42 in knockdown group were significantly lower than those in control group, and those in overexpression group were significantly higher than those in control group. After 7 days of osteogenic induction, the ALP activity in the knockdown group was significantly higher than that in the control group, and ALP activity in overexpression group was significantly lower than that in control group. After 14 days of osteogenic induction, ARS staining was significantly deeper in the knockdown group than in the control group, and significantly lighter in overexpression group than in the control group. The results of qRT-PCR showed that the mRNA expression levels of ALP, osterix (OSX) and collagen type Ⅰ (COLⅠ) in the knockdown group were significantly higher than those in the control group after 14 days of osteogenic induction, and those in overexpression group were significantly lower than those in control group. The results of Western blotting showed that the expression levels of runt-related transcription factor 2 (RUNX2), OSX and COLⅠ in the knockout group were significantly higher than those in the control group at 14 days after osteogenic induction, while the expression levels of RUNX2, OSX and COLⅠ in the overexpression group were significantly lower than those in the control group. Hematoxylin-eosin staining of subcutaneous grafts in nude mice showed that the percentage of osteoid area in the knockdown group was significantly higher than that in the control group. CONCLUSION: Knockdown of USP42 can significantly promote the osteogenic differentiation of hASCs in vitro and in vivo, and overexpression of USP42 significantly inhibits in vivo osteogenic differentiation of hASCs, and USP42 can provide a potential therapeutic target for bone tissue engineering.

[Effects of different polymers on biomimetic mineralization of small intestine submucosal scaffolds].

OBJECTIVE: To explore the effects of different polymers on in vitro biomimetic mineralization of small intestinal submucosa (SIS) scaffolds, and to evaluate the physicochemical properties and biocompatibility of the SIS scaffolds. METHODS: The SIS scaffolds prepared by freeze-drying method were immersed in simulated body fluid (SBF), mineralized liquid containing polyacrylic acid (PAA) and mine-ralized liquid containing PAA and polyaspartic acid (PASP). After two weeks in the mineralized solution, the liquid was changed every other day. SBF@SIS, PAA@SIS, PAA/PASP@SIS scaffolds were obtained. The SIS scaffolds were used as control group to evaluate their physicochemical properties and biocompatibility. We observed the bulk morphology of the scaffolds in each group, analyzed the microscopic morphology by environment scanning electron microscopy and determined the porosity and pore size. We also analyzed the surface elements by energy dispersive X-ray spectroscopy (EDX), analyzed the structure of functional groups by Flourier transformed infrared spectroscopy (FTIR), detected the water absorption rate by using specific gravity method, and evaluated the compression strength by universal mechanical testing machine. The pro-cell proliferation effect of each group of scaffolds were evaluated by CCK-8 cell proliferation method. RESULTS: Under scanning electron microscopy, the scaffolds of each group showed a three-dimensional porous structure with suitable pore size and porosity, and crystal was observed in all the mineralized scaffolds of each group, in which the crystal deposition of PAA/PASP@SIS scaffolds was more regular. At the same time, the collagen fibers could be seen to thicken. EDX analysis showed that the characteristic peaks of Ca and P were found in the three groups of mineralized scaffolds, and the highest peaks were found in the PAA/PASP@SIS scaffolds. FTIR analysis proved that all the three groups of mineralized scaffolds were able to combine hydroxyapatite with SIS. All the scaffolds had good hydrophilicity. The compressive strength of the mineralized scaffold in the three groups was higher than that in the control group, and the best compressive strength was found in PAA/PASP@SIS scaffold. The scaffolds of all the groups could effectively adsorb proteins, and PAA/PASP@SIS group had the best adsorption capacity. In the CCK-8 cell proliferation experiment, the PAA/PASP@SIS scaffold showed the best ability to promote cell proliferation with the largest number of living cells observed. CONCLUSION: Compared with other mineralized scaffolds, PAA/PASP@SIS scaffolds prepared by mineralized solution containing both PAA and PASP have better physicochemical properties and biocompatibility and have potential applications in bone tissue engineering.

A deep learning approach for projection and body-side classification in musculoskeletal radiographs.

BACKGROUND: The growing prevalence of musculoskeletal diseases increases radiologic workload, highlighting the need for optimized workflow management and automated metadata classification systems. We developed a large-scale, well-characterized dataset of musculoskeletal radiographs and trained deep learning neural networks to classify radiographic projection and body side. METHODS: In this IRB-approved retrospective single-center study, a dataset of musculoskeletal radiographs from 2011 to 2019 was retrieved and manually labeled for one of 45 possible radiographic projections and the depicted body side. Two classification networks were trained for the respective tasks using the Xception architecture with a custom network top and pretrained weights. Performance was evaluated on a hold-out test sample, and gradient-weighted class activation mapping (Grad-CAM) heatmaps were computed to visualize the influential image regions for network predictions. RESULTS: A total of 13,098 studies comprising 23,663 radiographs were included with a patient-level dataset split, resulting in 19,183 training, 2,145 validation, and 2,335 test images. Focusing on paired body regions, training for side detection included 16,319 radiographs (13,284 training, 1,443 validation, and 1,592 test images). The models achieved an overall accuracy of 0.975 for projection and 0.976 for body-side classification on the respective hold-out test sample. Errors were primarily observed in projections with seamless anatomical transitions or non-orthograde adjustment techniques. CONCLUSIONS: The deep learning neural networks demonstrated excellent performance in classifying radiographic projection and body side across a wide range of musculoskeletal radiographs. These networks have the potential to serve as presorting algorithms, optimizing radiologic workflow and enhancing patient care. RELEVANCE STATEMENT: The developed networks excel at classifying musculoskeletal radiographs, providing valuable tools for research data extraction, standardized image sorting, and minimizing misclassifications in artificial intelligence systems, ultimately enhancing radiology workflow efficiency and patient care. KEY POINTS: • A large-scale, well-characterized dataset was developed, covering a broad spectrum of musculoskeletal radiographs. • Deep learning neural networks achieved high accuracy in classifying radiographic projection and body side. • Grad-CAM heatmaps provided insight into network decisions, contributing to their interpretability and trustworthiness. • The trained models can help optimize radiologic workflow and manage large amounts of data.

Assessing peri-implant bone microarchitecture: conventional vs. osseodensification drilling - ex vivo analysis

Abstract: The aim was to evaluate primary implant stability and bone microarchitecture in two drilling situations, by comparing the conventional technique (CT) and osseodensification (OD) (Versah Burs - Jackson - Mississippi - USA). The implant insertion torque (IT), implant stability quotient (ISQ), and the peri-implant trabecular microstructure were assessed on bone fragments obtained from pig's tibia (n=12), divided between CT (n=6) and OD (n=6). After the drilling procedure, the implants were installed (3.5x8.5 mm, Epikut - SIN - São Paulo - Brazil). The IT and ISQ were measured using a digital torque wrench and resonance frequency analysis. Then, the bone fragments containing the implants were removed with a trephine and analyzed by Microtomography (µCT, 8.0 µm). The comparison between groups was performed using the unpaired t-test (α=0.05). The results revealed that OD promotes a higher insertion torque (CT: 7.67±2.44 Ncm; OD: 19.78±5.26 Ncm) (p=0.0005), although ISQ was not different (CT: 61.33±4.66; OD: 63.25±4.58) (p=0.48). There was a significant increase in peri-implant bone volume (CT: 23.17±3.39 mm3; OD: 32.01±5.75 mm3) (p=0.008), and trabecular parameters: separation (CT: 0.4357±0.03 mm; OD: 0.3865±0.04 mm) (p=0.0449), number (CT: 1.626±0.18 1/mm; OD: 1.946±0.13 1/mm) (p=0.007), and thickness (CT: 0.1130±0.009 mm; OD: 0.1328±0.015 mm) (p=0.02). Structure model index (SMI) data demonstrate no significant differences between groups (CT: 1.7±0.2; OD: 1.4±0.4) (p=0.12). In conclusion, OD increases the insertion torque values and promotes beneficial changes regarding bone microarchitecture compared with CT, revealing more peri-implant bone volume with consequent higher primary stability.

Resumo O objetivo deste estudo foi avaliar a estabilidade de implante e a microarquitetura óssea em duas técnicas de fresagem, comparando a técnica convencional (CT) e a osseodensificação (OD) (Versah Burs - Jackson - Mississippi - EUA). O torque de inserção do implante (IT), quociente de estabilidade primária (ISQ) e a estrutura trabecular peri-implantar foram avaliados em fragmentos ósseos obtidos de tíbia de porco (n=12), divididos entre CT (n=6) e OD (n=6). Após o procedimento de fresagem, foram instalados implantes (3,5x8,5 mm, Epikut - SIN - São Paulo - Brasil). O IT e o ISQ foram aferidos por meio de um torquimetro digital e análise de frequência de ressonância. Em seguida, os fragmentos ósseos contendo os implantes foram removidos com trefina e analisados ​​por microtomografia computadorizada (µCT, 8,0 µm). A comparação entre os grupos foi realizada por meio do teste-t não-pareado (α=0.05). Os resultados revelaram que a OD promove maior torque de inserção (CT: 7,67 ± 2,44º Ncm; OD: 19,78 ± 5,26 Ncm) (p=0,0005), embora a estabilidade primária não tenha sido diferente (CT: 61.33 ± 4.66; OD:63.25 ± 4.58) (p=0,48). Houve um aumento significativo no volume ósseo peri-implantar (CT: 23,17±3,39 mm3; OD: 32,01±5,75 mm3) (p=0,0089) e parâmetros trabeculares: separação (CT: 0,4357 ± 0,03 mm; OD: 0,3865 ± 0,04 mm) (p=0,0449), número (CT: 1,626 ± 0,18 1/mm; OD: 1,946 ± 0,13 1/mm) (p=0,007) e espessura (CT: 0,1130 ± 0,009 mm; OD: 0,1328 ± 0,015 mm) (p=0,02) O índice de modelo estrutural (SMI) não demostrou diferença estatisticamente significativa (p=0.1228). Concluindo, OD apresenta maiores valores de torque de inserção e promove mudanças benéficas na microarquitetura óssea em comparação com a TC, revelando maior volume ósseo peri-implantar.

Characterization of the Masquelet Induced Membrane Technique in a Murine Segmental Bone Defect Model.

Objective To reproduce in an animal model the surgical technique of Masquelet used in the treatment of critical bone defects and to analyze the characteristics of the membrane formed around the bone cement. Methods A 10mm critical defect was created in the femoral shaft of 21 Sprague-Dawley rats. After resection of the central portion of the diaphysis, the defect was stabilized with a Kirschner wire introduced through the medullary canal and with the interposition of a bone cement spacer. After 2, 4, and 6 weeks of the surgical procedure, the animals were euthanized and evaluated on radiographs of the posterior limb regarding the size of the defect, alignment and stability of the osteosynthesis. The membranes formed around the spacer were subjected to histological analysis to assess thickness, connective tissue maturation and vascular density. Results Over time, the membranes initially made up of loose connective tissue were replaced by membranes represented by dense connective tissue, rich in thick collagen fibers. At six weeks, membrane thickness was greater (565 ± 208µm) than at four (186.9 ± 70.21µm, p = 0.0002) and two weeks (252.2 ± 55.1µm, p = 0.001). All membranes from the initial time showed foci of osteogenic differentiation that progressively reduced over time. Conclusion In addition to the structural and protective function of the membrane, its intrinsic biological characteristics can actively contribute to bone regeneration. The biological activity attributed by the presence of foci of osteogenesis confers to the membrane the potential of osteoinduction that favors the local conditions for the integration of the bone graft.

Aneurysmal bone cyst-like changes developed in melorheostosis with epiphyseal osteopoikilosis.

Aneurysmal bone cyst (ABC) is a rare and usually painful condition, representing about 1% of all bone tumors. A geographical lytic, expansile, and septated radiological pattern, with fluid-fluid levels on MRI, is classically displayed. ABC can be a primary bone lesion (70% of patients) or can arise in an underlying condition and is subsequently named "ABC-like changes" (30%). ABC-like changes are more frequently encountered in skeletal segments affected by chondroblastoma, fibrous dysplasia, giant cell tumor, osteoblastoma, non-ossifying fibroma, and osteosarcoma. In this article, we describe the first case of ABC-like changes developed in association with an ultra-rare sclerosing bone disease: melorheostosis. Melorheostosis is characterized by recognizable patterns on radiological studies with a pathological increased bone density and a cortical thickening within the periosteal or endosteal space, usually with a "dripping candle wax" appearance. More rarely, other different radiological patterns can be observed, such as "osteopatia striata-like," "osteoma-like," "myositis ossificans-like," and mixed patterns. Pain and limb hypotrophy are the most common clinical manifestations. We report the case of a Caucasian male with a clinic-radiological diagnosis of melorheostosis (with epiphyseal osteopoikilosis) since the age of twelve. At the age of nineteen, he suffered from increased pain in the proximal right thigh, and the radiological control revealed an expansive septated lesion at the right proximal femoral bone. The diagnosis of ABC-like changes developed in melorheostosis was obtained after CT-guided bone biopsy and confirmed by open-incisional biopsy.

Zoledronate treatment exerts sex-independent effects on bone and dental physicochemical properties in mice jaw necrosis.

INTRODUCTION: Bisphosphonate (BF) therapy is strongly related to the occurrence of medication-related osteonecrosis of the jaw (ONJ). However, no previous study has evaluated if there are sex-related differences on the ONJ establishment together with bone biomechanical alterations, and if they could have a synergy with the ZA treatment. MATERIALS AND METHODS: This study aimed to analyze the physicochemical properties of mineralized tissues in a zoledronate (ZA)-related osteonecrosis mouse model, by a 2 × 2-factorial design, considering sex (female/male) and treatment (ZA/Saline) factors (n = 8/group). After three ZA (1.0 mg/kg) or saline administrations (days 0, 7, 14), the lower left second molar was extracted (day 42). Further ZA administration (day 49) and euthanasia (day 70) were conducted. After confirmation of ZA-induced jaw necrosis (histologic and microtomographic analysis), spectroscopic and mechanical parameters were assessed. RESULTS: ZA-treated groups presented lower bone density due to impaired healing of tooth extraction socket. Sex-related alterations were also observed, with lower bone density in females. Regarding biomechanical parameters, sex and treatment exerted independent influences. ZA, although decreasing flexural modulus and yield stress, increases stiffness mainly due to a higher bone volume. Females show less resistance to higher loads compared to males (considering dimension-independent parameters). Additionally, ZA increases crystallinity in bone and dental structure (p < 0.05). In summary, although strongly related to osteonecrosis occurrence, ZA modifies bone and dental mineral matrix, improving bone mechanical properties. CONCLUSION: Despite sex-dependent differences in bone biomechanics and density, osteonecrosis was established with no sex influence. No synergistic association between sex and treatment factors was observed in this study.

Characterization of the Masquelet Induced Membrane Technique in a Murine Segmental Bone Defect Model / Caracterização da membrana induzida pela técnica de Masquelet em modelo murino de defeito ósseo segmentar

Abstract Objective To reproduce in an animal model the surgical technique of Masquelet used in the treatment of critical bone defects and to analyze the characteristics of the membrane formed around the bone cement. Methods A 10mm critical defect was created in the femoral shaft of 21 Sprague-Dawley rats. After resection of the central portion of the diaphysis, the defect was stabilized with a Kirschner wire introduced through the medullary canal and with the interposition of a bone cement spacer. After 2, 4, and 6 weeks of the surgical procedure, the animals were euthanized and evaluated on radiographs of the posterior limb regarding the size of the defect, alignment and stability of the osteosynthesis. The membranes formed around the spacer were subjected to histological analysis to assess thickness, connective tissue maturation and vascular density. Results Over time, the membranes initially made up of loose connective tissue were replaced by membranes represented by dense connective tissue, rich in thick collagen fibers. At six weeks, membrane thickness was greater (565 ± 208μm) than at four (186.9 ± 70.21μm, p = 0.0002) and two weeks (252.2 ± 55.1μm, p = 0.001). All membranes from the initial time showed foci of osteogenic differentiation that progressively reduced over time. Conclusion In addition to the structural and protective function of the membrane, its intrinsic biological characteristics can actively contribute to bone regeneration. The biological activity attributed by the presence of foci of osteogenesis confers to the membrane the potential of osteoinduction that favors the local conditions for the integration of the bone graft.

Resumo Objetivo Reproduzir em modelo animal a técnica cirúrgica de Masquelet utilizada no tratamento de defeitos ósseos críticos e analisar as características da membrana formada em torno do cimento ósseo. Métodos Um defeito crítico de 10mm foi realizado na diáfise femoral de 21 ratos Sprague-Dawley. Após a ressecção da porção central da diáfise o defeito foi estabilizado com fio de Kirschner introduzido pelo canal medular e com a interposição de espaçador de cimento ósseo. Após 2, 4, e 6 semanas do procedimento cirúrgico os animais foram eutanasiados e avaliados em radiografias do membro posterior quanto ao tamanho do defeito, o alinhamento e a estabilidade da osteossíntese. As membranas formadas em torno do espaçador foram submetidas a análise histológica para avaliação da espessura, da maturação do tecido conjuntivo e da densidade vascular. Resultados Ao longo do tempo as membranas inicialmente constituídas por tecido conjuntivo frouxo foram substituídas por membranas representadas por tecido conjuntivo denso, rico em fibras colágenas espessas. Com seis semanas a espessura das membranas foi maior (565 ± 208μm) do que com quatro (186,9 ± 70,21μm, p = 0,0002) e duas semanas (252,2 ± 55,1μm, p = 0,001). Todas as membranas do tempo inicial apresentaram focos de diferenciação osteogênica que reduziram progressivamente ao longo do tempo. Conclusão Além da função estrutural e protetora da membrana, suas características biológicas intrínsecas podem contribuir ativamente para a regeneração óssea. A atividade biológica atribuída pela presença de focos de osteogênese confere à membrana potencial de osteoindução que favorece as condições locais para a integração do enxerto ósseo.

Association between Phase Angle and Body Composition of Children and Adolescents Diagnosed with HIV Infection.

The aim of the study was to investigate how phase angle (PhA) is associated with subtotal and lumbar spine bone mineral density [BMD], lean soft tissue mass [LSTM], total body fat mass, android and gynoid in children and adolescents with HIV according to sex. A cross-sectional study was conducted in Florianópolis, Brazil, involving 64 children and adolescents vertically transmitted with HIV. Resistance and reactance values were obtained using bioelectrical impedance analysis, and PhA was subsequently calculated. Dual emission X-ray absorptiometry was used to assess body composition. Antiretroviral medication, physical activity (accelerometers) and skeletal maturation (wrist-carpal radiography) were used in the adjusted model. In males, PhA was directly associated with subtotal BMD (ßadj: 0.65; R²: 0.38, p < 0.01) and lumbar spine BMD (ßadj: 0.53; R²: 0.22, p = 0.01), directly associated with LSTM (ßadj: 0.76; R²: 0.46, p < 0.01), and inversely associated with gynoid fat (ßadj: -0.47; R²: 0.2, p = 0.01), in adjusted models. In females, PhA was directly associated with subtotal BMD (ßadj: 0.46; R²: 0.17, p < 0.01) and lumbar spine BMD (ßadj: 0.48; R²: 0.19, p < 0.01). It is concluded that PhA was directly associated with subtotal and regional BMD, LSTM, and inversely with gynoid fat in boys with HIV. In girls, PA was directly associated only with subtotal and regional BMD.

New kids on the block: FOS and FOSB gene.

FOS and FOSB proto-oncogens are involved in a wide variety of tumourigenic processes. FOS and FOSB gene rearrangements are observed in epithelioid haemangioma, pseudomyogenic haemangioendothelioma, osteoid osteoma/osteoblastoma/cementoblastoma and proliferative myositis/fasciitis. In this review, we provide an overview of FOS and FOSB, including their functions and the differences between lesions with known FOS/FOSB gene rearrangements. Additionally, we discuss the use of FOS/FOSB immunohistochemistry as a diagnostic tool for these lesions.

A novel image augmentation based on statistical shape and intensity models: application to the segmentation of hip bones from CT images.

BACKGROUND: The collection and annotation of medical images are hindered by data scarcity, privacy, and ethical reasons or limited resources, negatively affecting deep learning approaches. Data augmentation is often used to mitigate this problem, by generating synthetic images from training sets to improve the efficiency and generalization of deep learning models. METHODS: We propose the novel use of statistical shape and intensity models (SSIM) to generate augmented images with variety in both shape and intensity of imaged structures and surroundings. The SSIM uses segmentations from training images to create co-registered tetrahedral meshes of the structures and to efficiently encode image intensity in their interior with Bernstein polynomials. In the context of segmentation of hip joint (pathological) bones from retrospective computed tomography images of 232 patients, we compared the impact of SSIM-based and basic augmentations on the performance of a U-Net model. RESULTS: In a fivefold cross-validation, the SSIM augmentation improved segmentation robustness and accuracy. In particular, the combination of basic and SSIM augmentation outperformed trained models not using any augmentation, or relying exclusively on a simple form of augmentation, achieving Dice similarity coefficient and Hausdorff distance of 0.95 [0.93-0.96] and 6.16 [4.90-8.08] mm (median [25th-75th percentiles]), comparable to previous work on pathological hip segmentation. CONCLUSIONS: We proposed a novel augmentation varying both the shape and appearance of structures in generated images. Tested on bone segmentation, our approach is generalizable to other structures or tasks such as classification, as long as SSIM can be built from training data. RELEVANCE STATEMENT: Our data augmentation approach produces realistic shape and appearance variations of structures in generated images, which supports the clinical adoption of AI in radiology by alleviating the collection of clinical imaging data and by improving the performance of AI applications. KEY POINTS: • Data augmentation generally improves the accuracy and generalization of deep learning models. • Traditional data augmentation does not consider the appearance of imaged structures. • Statistical shape and intensity models (SSIM) synthetically generate variations of imaged structures. • SSIM support novel augmentation approaches, demonstrated with computed tomography bone segmentation.

Fractal dimension, lacunarity, and cortical thickness in the mandible: Analyzing differences between healthy men and women with cone-beam computed tomography.

Purpose: The objective of this study was to assess the fractal dimension, lacunarity, trabecular microarchitecture parameters, and cortical linear measurements in the mandibles of male and female individuals to identify differences between them. Materials and Methods: In total, 116 cone-beam computed tomography scans of healthy individuals of different ages (57 men and 59 women, aged between 20 and 60 years) were selected. The following bone parameters were measured: 1) buccal, lingual, and basal cortical bone thickness in 5 standard parasagittal sections (the midline, the left and right sides of the lower lateral incisors, and the left and right sides of the lower canines); 2) the bone volume fraction of 10 sequential axial sections from each patient by creating a volume of interest in the area between the lower canines; and 3) fractal dimension and lacunarity using grayscale images of the same region of the volume of interest in the anterior mandible. Spearman correlation coefficients and the Mann-Whitney test were used. Results: A significant and positive correlation was found between age and cortical thickness, especially in the region of the central incisors. Significant differences between sexes in terms of fractal dimension, lacunarity, and bone volume were found. Women revealed lower fractal dimension values and higher lacunarity and bone volume ratio values than men. Conclusion: Fractal dimension, lacunarity, trabecular bone volume, and cortical thickness were different between men and women of different ages.

Bone involvement in non-congenital syphilis / Compromiso óseo por sífilis no congénita

We documented two stages of bone involvement due to syphilis in two adult patients infected with human immunodeficiency virus. Bony lesions of secondary versus tertiary syphilis cannot be differentiated on clinical or radiologic grounds alone. Given the rarity of this clinical presentation, there is no consensus on treatment duration and related outcomes.

Se describen dos etapas de compromiso óseo por sífilis en dos pacientes adultos infectados por el virus de la inmunodeficiencia humana. Las lesiones óseas de la sífilis secundaria y de la sífilis terciaria no se pueden diferenciar únicamente por características clínicas o radiológicas. Dada la rareza de esta presentación clínica, no hay consenso sobre la duración del tratamiento y los resultados relacionados.

Percutaneous CT-Guided Bone Biopsies: Indications, Feasibility and Diagnostic Yield in the Different Skeletal Sites-From the Skull to the Toe.

CT-guided bone biopsies are currently the diagnostic tool of choice for histopathological (and microbiological) diagnoses of skeletal lesions. Several research works have well-demonstrated their safety and feasibility in almost all skeletal regions. This comprehensive review article aims at summarizing the general concepts in regard to bone biopsy procedures, current clinical indications, the feasibility and the diagnostic yield in different skeletal sites, particularly in the most delicate and difficult-to-reach ones. The choice of the correct imaging guidance and factors affecting the diagnostic rate, as well as possible complications, will also be discussed. Since the diagnostic yield, technical difficulties, and complications risk of a CT-guided bone biopsy significantly vary depending on the different skeletal sites, subdivided analyses of different anatomical sites are provided. The information included in the current review article may be useful for clinicians assisting patients with possible bone neoplasms, as well as radiologists involved in the imaging diagnoses of skeletal lesions and/or in performing bone biopsies.

Bone involvement in non-congenital syphilis / Compromiso óseo por sífilis no congénita

We documented two stages of bone involvement due to syphilis in two adult patients infected with human immunodeficiency virus. Bony lesions of secondary versus tertiary syphilis cannot be differentiated on clinical or radiologic grounds alone. Given the rarity of this clinical presentation, there is no consensus on treatment duration and related outcomes.

Se describen dos etapas de compromiso óseo por sífilis en dos pacientes adultos infectados por el virus de la inmunodeficiencia humana. Las lesiones óseas de la sífilis secundaria y de la sífilis terciaria no se pueden diferenciar únicamente por características clínicas o radiológicas. Dada la rareza de esta presentación clínica, no hay consenso sobre la duración del tratamiento y los resultados relacionados.

New Insights into Calorie Restriction Induced Bone Loss.

Caloric restriction (CR) is now a popular lifestyle choice due to its ability in experimental animals to improve lifespan, reduce body weight, and lessen oxidative stress. However, more and more emerging evidence suggests this treatment requires careful consideration because of its detrimental effects on the skeletal system. Experimental and clinical studies show that CR can suppress bone growth and raise the risk of fracture, but the specific mechanisms are poorly understood. Reduced mechanical loading has long been thought to be the primary cause of weight loss-induced bone loss from calorie restriction. Despite fat loss in peripheral depots with calorie restriction, bone marrow adipose tissue (BMAT) increases, and this may play a significant role in this pathological process. Here, we update recent advances in our understanding of the effects of CR on the skeleton, the possible pathogenic role of BMAT in CR-induced bone loss, and some strategies to mitigate any potential side effects on the skeletal system.

Bony Stroke: Ischemic Stroke Caused by Mechanical Stress on Brain Supplying Arteries From Anatomical Bone or Cartilage Anomalies.

BACKGROUND: Bone or cartilage anomalies with affection of brain supplying arteries are a potential structural cause for ischemic stroke. In the following, we termed this entity bony stroke. Due to rarity of their description, there is no standardized workup and therapy for bony strokes. METHODS: Retrospectively, we extracted diagnostic and therapeutic workup of all patients considered to have had a bony stroke between January 2017 to March 2022 at our comprehensive care center. RESULTS: In total, 6 patients classified as a bony stroke were identified among 4200 acute patients with ischemic stroke treated during the study period. Each patient had recurrent ischemic strokes in the dependent vascular territory before diagnosis. Diagnosis was achieved by a combination of imaging devices, including sonography, computed tomography, and magnetic resonance imaging. In addition to conventional static imaging, the application of dynamic imaging modalities with the patients' head in rotation or reclination confirmed a vessel affection following head movements in 3 patients (50%). Treatment options were interdisciplinary assessed and included the following: conservative treatment (n=1), endovascular stenting (n=2) or occlusion (n=2), surgical removal of bone/ cartilage (n=2), and surgical bypass treatment (n=1). In follow-up (mean 11.7 months), no patient experienced further ischemia. CONCLUSIONS: As a differential diagnosis, bony strokes may be considered in patients with recurrent ischemic stroke of unknown cause in one dependent vascular territory. Interdisciplinary evaluation and treatment may eliminate risk of stroke recurrence.